Service & TroubleshootingCâu 85 / 110
A dirty flame sensor on a modern furnace most commonly causes what symptom?
a.Continuous cooling
b.The burners light then shut off after a few seconds (flame loss)
c.High head pressure
d.Frozen evaporator
Giải thích
A flame sensor confirms flame is present; when it is coated with oxide it cannot conduct the flame-rectification signal, so the control shuts off the gas as a safety response. Cleaning the sensor typically restores operation. This is a very common no-heat service call.
Luyện miễn phí toàn bộ 110 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- AFUE is the efficiency rating used for what equipment?
- HSPF (or HSPF2) rates the seasonal efficiency of what?
- A furnace that heats briefly then shuts off repeatedly before satisfying the thermostat is exhibiting what?
- When measuring the actual airflow of an installed system, which measurement helps diagnose a restrictive duct system?
- A capacitor that reads well below its rated microfarad value should be treated how?
- Recommended routine maintenance to preserve airflow and efficiency includes what?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-20 Warm-Air HVAC Trade Exam · Quy trình kiểm tra