Safety & CodesCâu 93 / 110
Under Cal/OSHA, what is the purpose of a lockout/tagout (LOTO) procedure?
a.To label refrigerant cylinders
b.To isolate and secure energy sources so equipment cannot start during service
c.To measure superheat
d.To size ductwork
Giải thích
Lockout/tagout requires de-energizing and physically locking energy-isolating devices, then tagging them, so machinery cannot be energized while a technician services it. This protects workers from electrical shock and unexpected startup. Cal/OSHA Title 8 sets the specific requirements.
Trích dẫn luật: Cal/OSHA Title 8Luyện miễn phí toàn bộ 110 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Carbon monoxide is dangerous primarily because it is what?
- A cracked heat exchanger in a gas furnace is a serious hazard because it can do what?
- Cal/OSHA defines a confined space as one that has what characteristics?
- When using a portable ladder, a safe practice is to maintain what?
- Refrigerant can cause frostbite because liquid refrigerant does what when it contacts skin?
- Refrigerant cylinders should be stored and handled how?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-20 Warm-Air HVAC Trade Exam · Quy trình kiểm tra