IrrigationCâu 13 / 100
Head-to-head spacing of spray heads means each head is spaced so its throw reaches what point?
a.Halfway to the next head
b.The base of the adjacent head
c.Twice the distance to the next head
d.Only the center of the zone
Giải thích
Head-to-head coverage, also called 100 percent overlap, spaces heads so each one throws water all the way to the adjacent head. Because spray heads apply less water at the outer edge of their radius, this overlap is required for even coverage. Spacing heads farther apart creates dry rings and poor uniformity.
Luyện miễn phí toàn bộ 100 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- As irrigation pipe diameter decreases while flow stays the same, what happens to friction (pressure) loss?
- A drip emitter rated at 1 GPH means it delivers approximately how much water per hour?
- Distribution uniformity (DU) in an irrigation audit measures what?
- A zone must deliver 18 GPM and the water meter supplies 12 GPM available flow. What is the BEST corrective action?
- A matched precipitation rate (MPR) nozzle set is designed to do what?
- A smart irrigation controller that adjusts run times using local weather data is called what?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-27 Landscaping Trade Exam · Quy trình kiểm tra