IrrigationCâu 10 / 100
As irrigation pipe diameter decreases while flow stays the same, what happens to friction (pressure) loss?
a.Friction loss decreases
b.Friction loss stays the same
c.Friction loss increases
d.Friction loss becomes zero
Giải thích
For a given flow rate, a smaller pipe forces water to move faster, and higher velocity dramatically increases friction loss along the pipe. This is why undersized pipe starves distant heads of pressure. Designers size pipe to keep velocity and friction loss within acceptable limits.
Luyện miễn phí toàn bộ 100 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- An atmospheric vacuum breaker (AVB) has which key installation limitation?
- Water hammer in an irrigation system is BEST reduced by which measure?
- Which pipe material is MOST commonly used for buried irrigation mainlines under constant pressure in California?
- A drip emitter rated at 1 GPH means it delivers approximately how much water per hour?
- Distribution uniformity (DU) in an irrigation audit measures what?
- Head-to-head spacing of spray heads means each head is spaced so its throw reaches what point?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-27 Landscaping Trade Exam · Quy trình kiểm tra