IrrigationCâu 9 / 100
Which pipe material is MOST commonly used for buried irrigation mainlines under constant pressure in California?
a.Thin-wall aluminum
b.Schedule 40 PVC or Class 315 for pressure mains
c.Corrugated black flex tubing
d.Galvanized steel
Giải thích
Buried pressure mainlines are commonly run in Schedule 40 PVC or an appropriate pressure-rated class of PVC because it handles constant pressure and resists corrosion. Lateral lines downstream of valves may use lighter class PVC since they are only pressurized during operation. Corrugated tubing is used for drainage, not pressurized supply.
Luyện miễn phí toàn bộ 100 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A pressure vacuum breaker (PVB) must be installed at what minimum height relative to the highest downstream sprinkler head or outlet?
- An atmospheric vacuum breaker (AVB) has which key installation limitation?
- Water hammer in an irrigation system is BEST reduced by which measure?
- As irrigation pipe diameter decreases while flow stays the same, what happens to friction (pressure) loss?
- A drip emitter rated at 1 GPH means it delivers approximately how much water per hour?
- Distribution uniformity (DU) in an irrigation audit measures what?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-27 Landscaping Trade Exam · Quy trình kiểm tra