Planning & EstimatingCâu 75 / 100
When estimating exterior siding area, why do many painters NOT deduct small openings like windows and doors?
a.The extra paint and labor for cutting in around openings roughly offsets the deducted area, and it adds a safety margin
b.Openings do not exist on exteriors
c.It is illegal to deduct openings
d.Paint is free so it does not matter
Giải thích
Cutting in and detailing around windows and doors takes extra labor and paint, so many estimators leave small openings in the gross area rather than deducting them. This offsets the added work and provides a margin against running short. Very large openings, like garage doors, are typically deducted.
Luyện miễn phí toàn bộ 100 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A rectangular wall is 40 feet long and 9 feet high. What is its area?
- A room has four walls totaling 800 sq ft of surface. The paint covers 400 sq ft per gallon and you plan two coats. How many gallons are needed?
- What is the purpose of reviewing the project plans and specifications before bidding a paint job?
- To estimate labor, a painter uses a production rate. If one painter coats 150 sq ft per hour and the job is 1,200 sq ft for one coat, how many labor-hours are needed?
- Why should surface prep be estimated as a separate labor item?
- A ceiling measures 20 ft by 15 ft. How much area must be covered?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-33 Painting & Decorating Trade Exam · Quy trình kiểm tra