Thoát nước, Nước thải & Thông hơiCâu 102 / 360
Using the half-diameter rule, the minimum vent size for a 4 inch drain is:
a.1-1/2 inch
b.2 inch
c.3 inch
d.4 inch
Giải thích
Half of a 4 inch drain is 2 inches, so the minimum vent is 2 inches (well above the 1-1/4 inch floor). A 1-1/2 inch vent is less than half the drain diameter and undersized. A 3 or 4 inch vent exceeds the minimum required, though developed length could increase the required size.
Trích dẫn luật: 2022 California Plumbing Code (CPC) §904.0Luyện miễn phí toàn bộ 360 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- The DFU value assigned to a single lavatory is:
- The DFU value of a residential kitchen sink is:
- What is the minimum vent size for a 3 inch drain, using the half-diameter rule?
- The required size of a vent pipe:
- In areas subject to frost closure, a vent extension through the roof must be increased to a minimum of 3 inches, and the change in size must be made at least:
- The horizontal drainage pipe between a fixture trap and its vent is called the:
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-36 Plumbing Trade Examination · Quy trình kiểm tra