Thoát nước, Nước thải & Thông hơiCâu 126 / 360
What term describes a vent that connects to the drain of a single fixture and extends independently to the outside air or to another vent?
a.Wet vent
b.Individual (back) vent
c.Circuit vent
d.Relief vent
Giải thích
An individual vent (sometimes called a back vent) serves the trap of one fixture and rises independently to open air or ties into another vent above the flood-level rim. It is the most basic vent type and directly protects a single trap seal from siphonage and back-pressure.
Trích dẫn luật: 2022 California Plumbing Code (CPC) §901.0Luyện miễn phí toàn bộ 360 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A vent terminal is located 8 feet horizontally from an openable window. Under the CPC it must either terminate at least 10 feet away or…
- An air admittance valve (AAV) serving an individual fixture must be installed a minimum distance above the horizontal branch drain it serves. What is that minimum?
- Where are air admittance valves (AAVs) prohibited from being installed?
- Two fixtures connected at the same level to a vertical drain and served by a single shared vent are using which venting method?
- A horizontal wet-vent system under the CPC is limited to serving fixtures within…
- In a bathroom-group wet vent, where is the dry vent connection typically made?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-36 Plumbing Trade Examination · Quy trình kiểm tra