Thoát nước, Nước thải & Thông hơiCâu 124 / 360
An air admittance valve (AAV) serving an individual fixture must be installed a minimum distance above the horizontal branch drain it serves. What is that minimum?
a.At the same level as the trap weir
b.1 inch above the flood-level rim
c.2 inches above the fixture drain
d.At least 4 inches (102 mm) above the horizontal branch drain
Giải thích
An AAV must be installed at least 4 inches above the horizontal branch drain it serves and above the trap weir of the fixture. This keeps the valve out of the wetted flow path so it can admit air freely when negative pressure occurs. AAVs must also remain accessible for replacement.
Trích dẫn luật: 2022 California Plumbing Code (CPC) §918.0Luyện miễn phí toàn bộ 360 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A plumber terminates a vent pipe through a residential roof that is used only for weather protection. What is the minimum height the vent must extend above the roof surface?
- A vent penetrates a roof deck that is also used as a sun deck or walking surface. How high must the vent terminal extend above that roof?
- A vent terminal is located 8 feet horizontally from an openable window. Under the CPC it must either terminate at least 10 feet away or…
- Where are air admittance valves (AAVs) prohibited from being installed?
- What term describes a vent that connects to the drain of a single fixture and extends independently to the outside air or to another vent?
- Two fixtures connected at the same level to a vertical drain and served by a single shared vent are using which venting method?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-36 Plumbing Trade Examination · Quy trình kiểm tra