Thiết bị & Bình nước nóngCâu 198 / 360
A standard fixture trap must maintain a liquid seal of not less than 2 inches and not more than:
a.4 inches
b.3 inches
c.6 inches
d.8 inches
Giải thích
A trap seal must be between 2 and 4 inches deep unless a deep-seal trap is required by other provisions. Too shallow a seal is easily broken by siphonage; too deep can retain solids. The 2-to-4-inch range balances protection and self-cleaning.
Trích dẫn luật: 2022 California Plumbing Code (CPC) §1002.1Luyện miễn phí toàn bộ 360 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Under CALGreen residential requirements, a lavatory (bathroom) faucet is generally limited to a maximum flow rate of about:
- Under CALGreen, a residential showerhead is generally limited to a maximum flow rate of:
- Which statement about traps on plumbing fixtures is correct?
- When setting a floor-mounted water closet, the connection to the closet flange must be made:
- A properly installed closet flange should sit at what position relative to the finished floor?
- What is the primary purpose of the wax ring used when setting a water closet?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-36 Plumbing Trade Examination · Quy trình kiểm tra