Thiết bị & Bình nước nóngCâu 199 / 360
When setting a floor-mounted water closet, the connection to the closet flange must be made:
a.with plumber's putty only
b.watertight and gastight, typically with a wax ring or approved gasket
c.using silicone caulk around the base as the only seal
d.by threading the bowl directly onto the drain
Giải thích
The water closet must seal to the closet flange with a wax ring or listed gasket so the joint is both watertight and gastight. The bowl is then bolted down evenly to the flange. A poor seal leaks water and lets sewer gas escape at the floor.
Luyện miễn phí toàn bộ 360 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Under CALGreen, a residential showerhead is generally limited to a maximum flow rate of:
- Which statement about traps on plumbing fixtures is correct?
- A standard fixture trap must maintain a liquid seal of not less than 2 inches and not more than:
- A properly installed closet flange should sit at what position relative to the finished floor?
- What is the primary purpose of the wax ring used when setting a water closet?
- An accessible (ADA/CBC) water closet must have the top of the seat at what height above the finished floor?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-36 Plumbing Trade Examination · Quy trình kiểm tra