Đường ống gaCâu 238 / 360
A sediment trap is generally NOT required at which of the following appliances?
a.A listed range, clothes dryer, or outdoor grill, where exempted by code
b.A gas furnace
c.A gas water heater
d.A gas boiler
Giải thích
Code generally exempts certain appliances such as listed ranges, clothes dryers, and outdoor grills from the sediment-trap requirement, while furnaces, boilers, and water heaters still require one. The trap protects the automatic gas valve on heating appliances from moisture and debris. Always check the specific list in the adopted code and the appliance instructions.
Trích dẫn luật: California Plumbing Code, Fuel Gas provisionsLuyện miễn phí toàn bộ 360 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- What is the typical manifold (burner) pressure delivered to a standard residential natural gas appliance?
- A single gas main serves a 40,000 BTU/hr water heater, a 100,000 BTU/hr furnace, and a 65,000 BTU/hr range. What total connected load must the main be sized to carry?
- What is the function of a gas pressure regulator in a piping system?
- Which material is the traditional default choice for interior fuel gas piping in residential and light commercial work?
- A tankless natural gas water heater lists an input of 199,000 BTU/hr. Using 1,000 BTU per cubic foot, what gas demand must the branch supplying it be sized for?
- A building is served by an elevated-pressure (2 psi) gas system. What component is required near each appliance?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-36 Plumbing Trade Examination · Quy trình kiểm tra