Lập kế hoạch & Dự toánCâu 295 / 360
Why should you check which edition of the California Plumbing Code the local jurisdiction has adopted before finalizing a design?
a.Editions never change any requirements
b.Only the fixture colors change between editions
c.The state prohibits using any local amendments
d.Requirements can change between editions and local amendments may add stricter rules that affect the design
Giải thích
Each 3-year edition can revise requirements, and local jurisdictions may adopt amendments that are stricter than the state minimum. Designing to an outdated edition or ignoring local amendments risks plan-check rejection. Confirming the adopted edition and amendments up front keeps the design compliant.
Luyện miễn phí toàn bộ 360 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- What does the term "top-out" refer to during the phases of a plumbing installation?
- On a plumbing plan you see three parallel lines each with a different break symbol: a single dash, a dash-dot, and a solid. What is the best way to know which system each represents?
- An estimator prices a job at 2 fixtures' rough-in per hour and there are 40 fixtures. If the labor rate is $60/hour, what is the estimated rough-in labor cost?
- In a plumbing isometric drawing, pipes are drawn at what angle to represent the three dimensions on a flat sheet?
- When planning a trench for a building sewer, what does the CPC require regarding the bottom of the trench?
- A plan note reads "See detail 3/P-4." What does this callout tell the installer?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-36 Plumbing Trade Examination · Quy trình kiểm tra