An toànCâu 352 / 360
A plumber carries heavy cast-iron fittings and works around pipe that could drop on the feet. What foot protection does Cal/OSHA require?
a.Ordinary sneakers are fine
b.Sandals for ventilation
c.Protective (safety-toe) footwear where there is a risk of foot injury from falling or rolling objects
d.Rubber boots only when it rains
Giải thích
Under Title 8 §3385, protective footwear must be worn where there is a danger of foot injuries from falling or rolling objects or from objects piercing the sole. Plumbing work with heavy pipe, fittings, and tools clearly presents that risk, so safety-toe boots meeting the applicable standard are required. Ordinary sneakers or sandals offer no protection against a dropped cast-iron fitting.
Trích dẫn luật: Cal/OSHA Title 8 §3385Luyện miễn phí toàn bộ 360 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A plumber uses acid-based soldering flux and a pipe-joint chemical cleaner. Under Cal/OSHA's Hazard Communication standard, what is required for these products?
- A plumber is cutting cast-iron pipe with a grinder, sending out sparks and metal chips. What PPE does Cal/OSHA require for this task?
- When respiratory protection is required, such as when a plumber must wear a respirator to work around certain fumes or dusts, what does Cal/OSHA §5144 require of the employer?
- A plumber uses a jackhammer and concrete saw for hours in a parking garage. What does Cal/OSHA require when noise exposure reaches hazardous levels?
- A plumber is replacing old galvanized and brass fixtures in a home built in the 1950s and notices old lead-based solder and possible lead pipe. What awareness does Cal/OSHA require?
- A plumber must cut into old cement pipe that may be asbestos-cement (transite). What is the correct precaution regarding asbestos?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-36 Plumbing Trade Examination · Quy trình kiểm tra