An toànCâu 350 / 360
A plumber is cutting cast-iron pipe with a grinder, sending out sparks and metal chips. What PPE does Cal/OSHA require for this task?
a.Eye and face protection such as safety glasses with side shields or a face shield
b.Only a dust mask
c.No PPE if the plumber is experienced
d.Just work gloves
Giải thích
Under Title 8 §3382, eye and face protection must be provided and used where there is a reasonable probability of injury from flying particles, sparks, or splashes. Grinding and cutting metal throws chips and sparks that can cause serious eye injury or blindness, so safety glasses with side shields, goggles, or a face shield are required. A dust mask alone does not protect the eyes.
Trích dẫn luật: Cal/OSHA Title 8 §3382Luyện miễn phí toàn bộ 360 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A plumber is brazing a joint on a fitting that may be cadmium-plated in a small, poorly ventilated mechanical room. What is the primary hazard and control?
- Before hot work in an area with combustible materials on the floor, what is the recommended practice for those combustibles?
- A plumber uses acid-based soldering flux and a pipe-joint chemical cleaner. Under Cal/OSHA's Hazard Communication standard, what is required for these products?
- When respiratory protection is required, such as when a plumber must wear a respirator to work around certain fumes or dusts, what does Cal/OSHA §5144 require of the employer?
- A plumber carries heavy cast-iron fittings and works around pipe that could drop on the feet. What foot protection does Cal/OSHA require?
- A plumber uses a jackhammer and concrete saw for hours in a parking garage. What does Cal/OSHA require when noise exposure reaches hazardous levels?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-36 Plumbing Trade Examination · Quy trình kiểm tra