Cấp nước & Phân phốiCâu 46 / 360
Elevation loss: a fixture is located 40 feet above the water meter. Using 0.433 psi per foot of elevation, how much static pressure is lost to elevation alone?
a.About 9.2 psi
b.About 17.3 psi
c.About 40 psi
d.About 4.3 psi
Giải thích
Elevation loss equals 40 ft x 0.433 psi/ft = about 17.3 psi. The 9.2 and 4.3 figures use incorrect factors, and 40 psi wrongly equates feet directly to psi without the 0.433 conversion.
Trích dẫn luật: 2022 California Plumbing Code (CPC) §610.0Luyện miễn phí toàn bộ 360 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A dedicated fire sprinkler system without antifreeze or chemical additives is connected to the potable main. Which backflow protection is generally the minimum appropriate for this typically low-hazard connection?
- Two identical branches serve the same fixture group, but branch A is 20 feet long and branch B is 80 feet long, same diameter and flow. Which statement about friction loss is correct?
- A testable backflow assembly such as an RP or DC must be installed so it can be maintained. Which installation requirement supports this?
- Why must dissimilar metals, such as copper tube connecting to galvanized steel pipe, be joined with a dielectric fitting?
- A carbonated beverage dispenser connects to the potable water supply, and CO2 can back-feed into copper tubing, forming corrosive carbonic acid that leaches copper. What protection does the code require?
- A main serves 60 WSFU predominantly through flushometer valves. Using a flush-valve Hunter conversion, this is about 51 gpm. If you had mistakenly used the flush-tank curve, you would get a much lower gpm. Why does the flush-valve column give a higher demand for the same fixture-unit count?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với California CSLB C-36 Plumbing Trade Examination · Quy trình kiểm tra