An toànCâu 1300 / 1605
The permissible exposure limit for asbestos is 0.1 fiber per cubic centimeter as an 8-hour TWA. Work disturbing asbestos is organized into:
a.Four classes (Class I through IV) based on the type of work and material
b.A single class for all work
c.No classes at all
d.Two classes only
Giải thích
1926.1101 divides asbestos construction work into Class I (removal of TSI and surfacing ACM) through Class IV (custodial/cleanup) based on hazard, with increasingly strict controls for higher classes.
Trích dẫn luật: 29 CFR 1926.1101(f)Luyện miễn phí toàn bộ 1605 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- The permissible exposure limit (PEL) for respirable crystalline silica under the OSHA construction standard is:
- Under the silica standard, employers must also establish and implement a:
- Before renovation or demolition of an older building, the standard approach to potential asbestos-containing materials (ACM) is to:
- Which is a required control when performing higher-risk (Class I) asbestos removal?
- When workers may be exposed to lead during construction (e.g., disturbing lead-based paint), the employer must initially:
- The OSHA permissible exposure limit for lead in construction is:
Cập nhật gần nhất: · quy trình kiểm tra
Sen Lin, Người sáng lập PrepPass · Đối chiếu với California CSLB Contractor License Law & Business Exam · Quy trình kiểm tra
Người kiểm duyệt Abraham Chen — Licensed California General Contractor (CSLB License #1101856 — kiểm tra)