Infection ControlCâu 64 / 100
Which gloves should be worn when cleaning contaminated instruments and disinfecting operatory surfaces?
a.Heavy-duty puncture-resistant utility gloves
b.The same examination gloves worn during the procedure
c.Sterile surgical gloves
d.No gloves, provided hands are washed afterward
Giải thích
Puncture-resistant utility gloves are required for instrument processing and surface cleaning because thin examination gloves tear easily and offer little protection against sharp instruments and harsh chemicals. Reusing the treatment gloves spreads contamination and provides no puncture resistance. Sterile surgical gloves are intended for surgical procedures, and working barehanded around contaminated sharps is never acceptable.
Trích dẫn luật: OSHA Bloodborne Pathogens Standard (29 CFR 1910.1030)Luyện miễn phí toàn bộ 100 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- How should an instrument processing area be laid out?
- Contaminated instruments cannot be cleaned right away because the office is short-staffed. Why are they placed in a holding solution?
- Why is an ultrasonic cleaner or instrument washer preferred over hand scrubbing contaminated instruments?
- How often should a dental office perform biological (spore) monitoring of each sterilizer?
- Which organism is used in the spore test that verifies a steam autoclave is working?
- An assistant sees that the tape on a sterilization pouch has changed color and concludes the instruments inside are sterile. Why is that conclusion wrong?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với DANB Radiation Health & Safety (RHS) + Infection Control (ICE) Exams · Quy trình kiểm tra