Infection ControlCâu 65 / 100
How often should a dental office perform biological (spore) monitoring of each sterilizer?
a.Once a year at the annual equipment inspection
b.Once a month
c.Only when a sterilizer is repaired
d.At least weekly, and also with every load containing an implantable device
Giải thích
Biological monitoring with spore tests is performed at least weekly for each sterilizer, and additionally with every load that contains an implantable device, because spores are the only method that verifies microorganisms were actually killed. Annual or monthly testing would leave failures undetected for long periods. Testing after repairs is also required, but it does not replace the routine weekly schedule.
Trích dẫn luật: CDC Guidelines for Infection Control in Dental Health-Care SettingsLuyện miễn phí toàn bộ 100 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- Contaminated instruments cannot be cleaned right away because the office is short-staffed. Why are they placed in a holding solution?
- Why is an ultrasonic cleaner or instrument washer preferred over hand scrubbing contaminated instruments?
- Which gloves should be worn when cleaning contaminated instruments and disinfecting operatory surfaces?
- Which organism is used in the spore test that verifies a steam autoclave is working?
- An assistant sees that the tape on a sterilization pouch has changed color and concludes the instruments inside are sterile. Why is that conclusion wrong?
- Which set of parameters describes a typical steam autoclave cycle for wrapped instruments?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với DANB Radiation Health & Safety (RHS) + Infection Control (ICE) Exams · Quy trình kiểm tra