Type I — Small AppliancesCâu 106 / 240
A technician wants to recover refrigerant faster from a small appliance in cold weather when system pressure is very low. Which safe method raises pressure to aid recovery?
a.Warm the appliance or its heat exchanger gently, for example with warm water or a heat gun
b.Add nitrogen to push the refrigerant out through the recovery machine
c.Connect the recovery cylinder to a 120-volt heater strip inside the coil
d.Pressurize the low side with shop air
Giải thích
Gentle warming of a cold small appliance raises the refrigerant's saturation pressure, helping it flow into the recovery equipment faster. Adding nitrogen or shop air would contaminate the recovered refrigerant with noncondensables and is not acceptable practice. Any warming should be gentle to avoid damaging the system or overheating oil.
Luyện miễn phí toàn bộ 240 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A landlord asks a Type I technician to simply cut the lines and toss out several old mini-fridges. What is the technician's correct response?
- Which of these is a defining physical feature of a small appliance that distinguishes it from field-installed equipment?
- A technician finishes recovering a refrigerator and disconnects the equipment. To verify that recovery met the requirement using the vacuum method, what should the gauge read?
- When a small appliance's compressor is operable, why does the rule require a higher recovery level (90%) than when it is inoperable (80%)?
- A recycling center employee, who is not an HVAC technician, is the last person to handle scrap refrigerators before shredding. What must the facility ensure?
- A technician finds a household refrigerator whose sealed system was already opened and is now at 0 psig (atmospheric). During service the technician plans to recover any refrigerant present. What is the best action?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với EPA Section 608 Technician Certification Exam · Quy trình kiểm tra