Type II — High-PressureCâu 128 / 240
During evacuation of a Type II system, a technician wants to confirm the system has reached a deep, dry vacuum. Which instrument gives the precise reading needed?
a.A micron (vacuum) gauge
b.A standard compound gauge on the manifold
c.A superheat thermometer
d.A clamp-on ammeter
Giải thích
A micron gauge (electronic vacuum gauge) reads the very low absolute pressures needed to confirm a deep, dry vacuum, often around 500 microns for good dehydration. A standard compound gauge is not precise enough in deep vacuum. Superheat thermometers and ammeters measure entirely different parameters.
Luyện miễn phí toàn bộ 240 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A technician must recover a large liquid charge from a supermarket rack quickly. Which recovery method moves the most refrigerant in the least time for large systems?
- A technician wants to speed up vapor recovery from an R-410A condensing unit. Which practice will increase recovery speed?
- After replacing a compressor on an R-410A system, a technician needs to remove moisture and noncondensables before charging. Which procedure is the correct way to dehydrate the system?
- A technician performs triple evacuation on a Type II system. What gas is used to break the vacuum between evacuations?
- A technician is charging an R-410A system that uses a near-azeotropic blend. To keep the blend's composition correct, how should refrigerant be removed from the cylinder during charging?
- A technician checks the charge on an R-22 system that uses a fixed orifice (piston) metering device. Which measurement is the primary method to verify the charge?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với EPA Section 608 Technician Certification Exam · Quy trình kiểm tra