Type III — Low-PressureCâu 168 / 240
To speed up refrigerant recovery from a low-pressure chiller, a technician should:
a.Apply a torch to the chiller shell
b.Add nitrogen to raise pressure to 20 psig
c.Cool the chiller and warm the cylinder
d.Warm the refrigerant and keep the cylinder cool
Giải thích
Recovery moves fastest when the refrigerant is warm and the recovery cylinder is cooler, so vapor naturally migrates toward the cold cylinder. Warm the chiller by circulating warm water or using built-in heaters, never a torch. Overpressurizing with nitrogen or applying open flame is unsafe.
Luyện miễn phí toàn bộ 240 câu hỏi — không cần đăng ký.
Own the complete EPA Section 608 Certification guide — PDF + EPUB, $14.99 →
Câu hỏi liên quan cùng chủ đề
- Which of the following is a low-pressure refrigerant used in centrifugal chillers?
- Because a low-pressure chiller operates in a vacuum on the low side, what happens when it develops a leak?
- Water entering the refrigerant side of a low-pressure chiller through a leaking tube is dangerous mainly because it can:
- Frequent operation of the purge unit on a low-pressure chiller is usually a sign that:
- 40 CFR §82.152 classifies appliances by their refrigerant's liquid-phase saturation pressure at 104°F. Which range makes an appliance low-pressure?
- Which gas is safe to use, along with a trace of refrigerant, to raise pressure in a low-pressure appliance for leak detection?
Cập nhật gần nhất: · quy trình kiểm tra
Đội ngũ PrepPass · Đối chiếu với EPA Section 608 Technician Certification Exam · Quy trình kiểm tra