Recovery & RecyclingCâu 219 / 240
Recovering liquid refrigerant before vapor on a large system is recommended because it:
a.Removes the bulk of the charge much faster
b.Is required before recycling
c.Cleans the refrigerant
d.Prevents the cylinder from overfilling
Giải thích
Pulling liquid first moves the largest portion of the charge quickly, then vapor recovery finishes drawing the system down to the required level. This shortens the job significantly on a big system. It is a technique choice, not a cleaning or a legal recycling prerequisite.
Luyện miễn phí toàn bộ 240 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- The required evacuation level for recovery depends on:
- How often must a refillable recovery cylinder undergo a hydrostatic test to remain legal for use?
- To fill a recovery cylinder accurately to the 80 percent limit, a technician should:
- Which records support Section 608 compliance for a service company?
- A one-trip (disposable) refrigerant cylinder should be:
- The recovery process that reduces moisture and acid in refrigerant using a filter-drier is part of:
Cập nhật gần nhất: · quy trình kiểm tra
Sen Lin, Người sáng lập PrepPass · Đối chiếu với EPA Section 608 Technician Certification Exam · Quy trình kiểm tra