Water Supply & DistributionCâu 48 / 120
Which copper tube designation has the heaviest wall thickness and is the type commonly required for an underground water service?
a.Type M
b.Type L
c.Type K
d.Type DWV
Giải thích
Wall thickness runs K heaviest, then L, then M, so Type K is specified where the tube is buried and exposed to soil and backfill loading. Type L is the common choice for interior water distribution and Type M is the thinnest pressure type, often restricted to above-ground use. Type DWV is not a pressure-rated water tube at all and is limited to drain, waste, and vent service.
Trích dẫn luật: UPC §604.0Luyện miễn phí toàn bộ 120 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- An atmospheric vacuum breaker serves a fixture whose flood level rim is 34 in above the finished floor. What is the minimum height above the floor at which the vacuum breaker may be installed?
- A pressure vacuum breaker protects a lawn irrigation zone whose highest sprinkler head is 42 in above grade. What is the minimum height above grade for the vacuum breaker?
- Which condition makes a pressure vacuum breaker an unacceptable choice for a given cross-connection?
- What is the maximum lead content permitted in solder and flux used on a potable water piping system?
- What is the maximum weighted average lead content permitted on the wetted surfaces of pipe, fittings, and fixtures used to convey water for human consumption?
- Static pressure at the main is 72 psi. Meter loss at design flow is 9 psi, the highest fixture is 26 ft above the meter, and 15 psi residual is required at that fixture. How much pressure is available to overcome friction loss in the piping?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với Journeyman Plumber Licensing Exam (UPC/IPC-based) · Quy trình kiểm tra