Code Admin & SafetyCâu 96 / 110
For equipment operating at 0-150 V to ground under Condition 1, what is the minimum depth of working space in front of the equipment?
a.2 ft
b.2.5 ft
c.4 ft
d.3 ft
Giải thích
Condition 1 (exposed live parts on one side, no grounded parts opposite) requires a minimum working clearance of 3 ft for 0-150 V.
Trích dẫn luật: 2023 NEC 110.26(A)(1)Luyện miễn phí toàn bộ 110 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- What is the minimum required width of working space in front of electrical equipment?
- What is the minimum headroom (height) of working space about electrical equipment such as panelboards?
- The dedicated equipment space above a panelboard extends how far above the equipment (or to a structural ceiling if lower)?
- Equipment rated at what current or more requires two entrances to and egress from the working space when the space is large or contains overcurrent devices?
- For a circuit rated 100 A or less, conductor ampacity is generally based on which temperature column unless the equipment is listed otherwise?
- For circuits rated over 100 A, conductor ampacity for terminations is generally based on which temperature column?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với Master Electrician Licensing Exam (NEC-based) · Quy trình kiểm tra