Safety & Infection ControlCâu 41 / 100
What is the correct sequence for donning (putting on) personal protective equipment?
a.Gown, mask/respirator, goggles/face shield, gloves
b.Gloves, gown, mask, goggles
c.Mask, gloves, gown, goggles
d.Goggles, gloves, gown, mask
Giải thích
The correct donning order is gown first, then mask or respirator, then goggles or face shield, and finally gloves. Gloves are put on last so they cover the cuffs of the gown. Following this sequence ensures each item is properly positioned for protection.
Trích dẫn luật: CDCLuyện miễn phí toàn bộ 100 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A patient is placed on contact precautions for a multidrug-resistant organism. What PPE should the technician don before entering the room to provide direct care?
- Droplet precautions are used for organisms spread by respiratory droplets. How far do these large droplets typically travel?
- A technician must enter the room of a patient with active pulmonary tuberculosis, which spreads by airborne transmission. Which respiratory protection is required?
- When doffing (removing) PPE after patient care, which item is generally removed first?
- Under the OSHA Bloodborne Pathogens Standard, what is the correct way to handle a contaminated needle after use?
- A sharps container is about three-quarters full. What is the appropriate action?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với NHA Certified Patient Care Technician/Assistant (CPCT/A) Exam · Quy trình kiểm tra