Patient CareCâu 5 / 100
A technician is checking a patient for orthostatic hypotension. After measuring blood pressure while the patient is lying down, what is the correct next step?
a.Measure the pulse only, not the pressure
b.Have the patient stand or sit and re-measure blood pressure and pulse
c.Give the patient fluids before any further readings
d.Wait 30 minutes before the next reading
Giải thích
Orthostatic (postural) vital signs are taken by measuring blood pressure and pulse in the lying position, then again after the patient sits or stands. A drop of 20 mmHg systolic or 10 mmHg diastolic, or a rise in pulse of 20 bpm, suggests orthostatic hypotension. Guard the patient against falling during the position change.
Luyện miễn phí toàn bộ 100 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- What is the normal respiratory rate range for a resting adult?
- According to widely accepted guidelines, a normal adult blood pressure reading is closest to which value?
- A technician takes an oral temperature and records 98.6°F. Which statement about this reading is correct?
- A pulse oximeter reads 97% on room air for a stable adult. How should the technician interpret this value?
- A patient with difficulty breathing is most likely to be positioned in which way to ease respiration?
- Before transferring a weak but weight-bearing patient from bed to a wheelchair, the technician applies a gait belt. Where should the belt be positioned?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với NHA Certified Patient Care Technician/Assistant (CPCT/A) Exam · Quy trình kiểm tra