Prep, Packaging & StorageCâu 78 / 100
How should the cutting performance of surgical scissors be verified during inspection?
a.By running a fingernail along the blade edge
b.By cutting through the appropriate test material, such as several layers of gauze or a test material specified by the manufacturer, using the distal third of the blades
c.By holding the blades up to the light to check for gaps
d.By opening and closing the scissors to check the pivot screw only
Giải thích
Scissors are tested by cutting a standardized material with the tips, because the distal portion of the blades is where dullness first appears and where clinical cutting failures occur. Feeling the edge is subjective and creates a sharps injury risk. Light inspection and pivot checks are useful additional steps but do not confirm cutting performance.
Trích dẫn luật: AAMI ST79Luyện miễn phí toàn bộ 100 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- A technician is inspecting instruments at the assembly workstation. Which tool and technique should be used?
- A technician notices that a hinged instrument is stiff during inspection and asks which lubricant to apply before packaging. What is correct?
- An instrument set is being assembled. Which practice supports effective sterilization and safe handling?
- A peel pouch is being prepared for a single ring-handled instrument. Which practice is correct?
- What must be verified about a rigid sterilization container each time it is used?
- A technician is applying labels to packages as they are assembled for sterilization. What information belongs on the label of a sterilized package?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với HSPA Certified Registered Central Service Technician (CRCST) Exam · Quy trình kiểm tra