White Card (Construction Induction) Practice Test — All Questions

4 questions

Common Construction Hazards

What is consistently one of the leading causes of death on Australian construction sites?

  • a.Falls from height
  • b.Paper cuts
  • c.Slippery floors only
  • d.Loud music

Falls from height are a leading cause of construction fatalities. Controls include edge protection, guard rails, safe scaffolds, and fall-arrest systems when higher-order controls are not reasonably practicable.

Common Construction Hazards

Before digging or excavating, what must you do about underground services such as gas, electricity and water?

  • a.Assume there are none
  • b.Locate them first, for example by using 'Before You Dig' information and on-site location, before excavation begins
  • c.Dig quickly to avoid them
  • d.Only check after you hit something

Striking underground services can cause electrocution, explosion or flooding. Services must be located and marked before excavation, using utility plans (such as the national Before You Dig service) and safe digging practices.

Common Construction Hazards

When working near overhead powerlines or with electrical leads on site, a key safety practice is to:

  • a.Use damaged leads to finish faster
  • b.Ignore the powerlines
  • c.Keep clear of powerlines, use tested-and-tagged equipment and RCDs (safety switches), and never use damaged leads
  • d.Run leads through puddles

Electricity is a major construction hazard. Maintain safe clearances from overhead lines, protect circuits with residual current devices (safety switches), use equipment that is tested and tagged, and remove damaged leads from service.

Common Construction Hazards

To keep workers safe around mobile plant such as excavators and trucks, sites commonly use:

  • a.No controls at all
  • b.Workers standing behind reversing vehicles
  • c.Bright clothing only
  • d.Exclusion zones, spotters and separation of pedestrians from moving plant

People being struck by mobile plant is a serious risk. Controls include exclusion zones, trained spotters, traffic management plans, reversing alarms and physically separating pedestrians from operating plant.

Report