CSLB General Building (B) — All Questions

When inspecting a tank vehicle, why is checking for leaks especially important?

• a.Because tanks never need weight checks
• b.Because leaks are only a problem after unloading
• c.Because leaking cargo can be hazardous and signals a serious defect✓
• d.Because tank inspections are optional for food products

Tank vehicles have special inspection needs, and checking for leaks is one of the most important. A leak may indicate a defect that could be dangerous, especially with hazardous cargo. Any leaking tank should be taken out of service until repaired.

During a tank vehicle inspection, what should you check on the manhole (dome) covers?

• a.That the covers and gaskets seal properly and are not leaking✓
• b.That the covers are painted the correct color
• c.That the covers can be opened while driving
• d.That the covers are welded permanently shut

You must inspect the manhole or dome covers and their gaskets to make sure they seal tightly and do not leak. Vents and covers must close properly so the cargo stays contained. A leaking or loose cover is a defect that must be corrected before driving.

Why is it important to inspect vents on a tank vehicle?

• a.Vents are only used to fill the tank faster
• b.Vents control the color of the placards
• c.Vents replace the need for a pressure relief valve
• d.Vents must work properly so the tank does not collapse or build dangerous pressure✓

Many tanks have vents that must operate correctly to keep pressure balanced. If a vent is clogged or stuck, the tank could build up pressure or form a vacuum and collapse. Checking that vents are clear and functional is part of a proper tank inspection.

What special equipment should you check on a tank vehicle during inspection?

• a.Only the radio and mirrors
• b.Special-purpose equipment such as vapor recovery kits, hoses, and connections if the vehicle has them✓
• c.The cargo temperature gauge in the cab only
• d.The paint on the outside of the tank

Tank vehicles may carry special equipment such as hoses, pumps, connections, and vapor recovery gear depending on the cargo. You must make sure any such equipment is present, in good condition, and properly stored. Missing or damaged equipment can make loading and unloading unsafe.

Because tank vehicles are often heavy, what should you pay extra attention to during inspection?

• a.The color of the cab
• b.The number of cup holders
• c.Tires, wheels, and the braking system, since heavy loads stress them✓
• d.The radio antenna

Tank vehicles carry heavy loads that place extra stress on tires, wheels, and brakes. You should inspect tires for proper inflation and condition and check the braking system carefully. Worn or underinflated components are more likely to fail under a heavy tank load.

What should you do if you find a leak during a pre-trip inspection of a tanker?

• a.Drive slowly to the nearest customer
• b.Ignore it if the cargo is non-hazardous
• c.Cover it with tape and continue
• d.Do not drive the vehicle until the leak is repaired✓

A leaking tank is a serious defect and may be hazardous, especially with dangerous cargo. You must not operate a leaking tank vehicle until the leak is properly repaired. Continuing to drive risks cargo loss, contamination, and possible fire or environmental damage.

When inspecting the piping, hoses, and connections on a tank, what are you looking for?

• a.Leaks, damage, and loose or missing fittings✓
• b.The manufacturer's logo
• c.The correct shade of paint
• d.Whether they can be removed while driving

Piping, hoses, and connections must be checked for leaks, cracks, wear, and secure fittings. Loose or damaged connections can leak cargo during transport or unloading. All valves and caps should be properly closed and secured before the trip.

Emergency equipment such as fire extinguishers and warning devices should be checked during a tanker inspection because:

• a.They are only required for buses
• b.Tank cargo can be flammable or hazardous, so emergency gear must be present and working✓
• c.They add weight to balance the load
• d.They are used to open the dome covers

Many tank cargoes are flammable or otherwise hazardous, so functioning emergency equipment is essential. You must verify that fire extinguishers, warning triangles, and other required emergency gear are present and in working order. Missing emergency equipment can be a serious violation and a safety risk.

Why should you inspect the tank's mounting and the frame or supports?

• a.To confirm the tank matches the truck's color
• b.To measure the tank's capacity
• c.To ensure the tank is securely attached and supports are not cracked or loose✓
• d.To check the fuel economy rating

The tank must be firmly mounted to the vehicle with sound supports and hardware. Cracked, loose, or corroded mounting can allow the tank to shift or separate, which is extremely dangerous with a heavy liquid load. Inspecting the mounting is a key part of a tank vehicle check.

If your tank vehicle requires hazardous materials placards, when should you confirm they are correct and in place?

• a.Only after delivery
• b.Only if a police officer asks
• c.Placards are never needed on tanks
• d.Before the trip, as part of your inspection✓

If you haul a hazardous material that requires placards, you must display the correct placards on all four sides. Checking that the proper placards are present, clean, and undamaged is part of your pre-trip inspection. Missing or wrong placards are both a safety hazard and a legal violation.

What should you check about the tank's valves during inspection?

• a.That they open and close properly and are not leaking✓
• b.That they are painted red
• c.That they can be operated from the cab while driving
• d.That they are removed before travel

Intake, discharge, and cutoff valves must work correctly and seal without leaking. Before driving, all manual valves should be in the proper position and secured. Leaking or stuck valves can cause cargo loss during transport and must be repaired.

During inspection, why should you check that all tank openings are closed and secured?

• a.To keep the tank warm
• b.To prevent cargo from spilling or surging out during transport✓
• c.To improve the vehicle's fuel mileage
• d.To make the tank easier to paint

Open or unsecured hatches, valves, and caps can allow cargo to spill or splash out while driving. Securing all openings keeps the cargo contained and reduces the risk of leaks and contamination. This check is essential before every trip with a loaded tank.

Because a loaded tank places heavy stress on the suspension, what should you inspect?

• a.The windshield wipers only
• b.The cab's interior lights
• c.Springs, air bags, and other suspension components for damage or wear✓
• d.The company logo decals

Heavy tank loads stress the suspension, so you should inspect springs, air suspension bags, hangers, and related parts. Cracked or worn suspension components can fail under load and cause loss of control. A thorough suspension check is especially important on heavy tank vehicles.

What is a good reason to walk completely around the tank vehicle during inspection?

• a.To count the number of wheels for the log
• b.To admire the paint job
• c.To warm up before driving
• d.To spot leaks, damage, and loose equipment on all sides of the tank✓

Walking all the way around the vehicle lets you spot leaks, dents, loose fittings, and damaged equipment that you cannot see from one side. Tank vehicles have valves, hoses, and covers on multiple sides that all need checking. A full walk-around helps ensure nothing dangerous is missed.

When should the pre-trip inspection of a tank vehicle be completed?

• a.Before starting the trip, so defects are found before driving✓
• b.Only after the first hour of driving
• c.Only when the tank is empty
• d.Once per month regardless of trips

A thorough pre-trip inspection must be done before you start driving so that leaks, worn parts, and other defects are caught early. Finding a problem before the trip prevents breakdowns and dangerous failures on the road. Tank vehicles especially require this careful check because of their hazardous and heavy loads.

Why is checking tire inflation especially important on a loaded tanker?

• a.Overinflated tires make the tank lighter
• b.Heavy loads and heat can cause underinflated tires to fail✓
• c.Tire pressure changes the tank's capacity
• d.Tires do not matter on tank vehicles

A heavy tank load and the heat of travel put great stress on tires. Underinflated or damaged tires are far more likely to fail under this stress, which can cause a blowout and loss of control. Checking tire pressure and condition is a critical part of the tanker inspection.

What should you verify about the gaskets and seals around tank openings?

• a.That they are the correct brand name
• b.That they glow in the dark
• c.That they are in good condition and seal tightly without leaking✓
• d.That they can be removed by hand while driving

Gaskets and seals must be intact and seal tightly so the cargo stays contained. Cracked, dried out, or missing gaskets can allow leaks around covers and fittings. Replacing worn seals before a trip prevents cargo loss and contamination.

Inspecting the coupling system on a tank trailer is important because:

• a.It changes the color of the placards
• b.It sets the cargo temperature
• c.It has nothing to do with safety
• d.A failed coupling could allow a heavy loaded tank to separate from the tractor✓

The coupling system, including the fifth wheel and kingpin, must be secure and undamaged. With the heavy weight of a loaded tank, a coupling failure could let the trailer break away with catastrophic results. Carefully checking the coupling is essential before pulling a tank trailer.