Connecticut Permit Test (CT DMV Knowledge Test) — All Questions

A red, eight-sided (octagonal) sign requires you to:

• a.Merge into the next lane
• b.Stop only if a vehicle is approaching
• c.Slow down and yield to the right
• d.Make a complete stop, then go when it is safe✓

A red octagon is always a STOP sign; you must come to a full stop at the stop line or crosswalk and proceed only when it is safe. (Connecticut Driver's Manual, traffic signs)

A yellow diamond-shaped sign is used to:

• a.Mark a rest area
• b.Show a mandatory turn
• c.Warn of a hazard or change in the road ahead✓
• d.Set the legal speed limit

Yellow diamond signs are warning signs that alert you to hazards or changes in the road ahead so you can slow down and prepare. (Connecticut Driver's Manual)

A flashing red traffic signal means:

• a.Speed up to clear the intersection
• b.The signal is out of service, so ignore it
• c.Turn left only
• d.Stop completely, then proceed when it is safe, as at a STOP sign✓

A flashing red light has the same meaning as a STOP sign: stop fully, then continue when the way is clear. (Connecticut Driver's Manual, traffic signals)

A five-sided (pentagon) sign marks:

• a.A freeway exit
• b.A no-passing area
• c.A hospital zone
• d.A school zone or school crossing✓

The pentagon (five-sided) shape identifies school zones and school crossings; slow down and watch for children. (Connecticut Driver's Manual)

A solid white line along the road usually means:

• a.The lane is for turning only
• b.You may cross freely at any time
• c.It marks the edge of the road or a lane where changes are discouraged✓
• d.Passing is required

A solid white line marks the road edge or separates same-direction lanes where lane changes are discouraged. (Connecticut Driver's Manual, pavement markings)