Regulations & SafetyQuestion 71 of 240
A technician plans to braze on a system. What is the correct sequence regarding the refrigerant charge before applying heat?
a.Braze first, then recover whatever is left
b.Leave the charge in place; the heat will help it flow
c.Recover the refrigerant and relieve pressure before brazing, and ensure no refrigerant remains where the flame will be
d.Vent the refrigerant quickly, then braze
Explanation
Before brazing, the technician must recover the refrigerant and relieve system pressure so that no refrigerant remains where the flame will be applied, preventing toxic decomposition and dangerous pressure. Brazing first, leaving the charge in, or venting the refrigerant are all unsafe or illegal. Purging with dry nitrogen while brazing is also good practice to prevent oxidation inside the tubing.
Practice all 240 questions free — no signup required.
Related questions on this topic
- A technician charging a high-pressure R-410A system should be especially aware that, compared with R-22, R-410A operates at:
- Where should refrigerant cylinders be stored to remain safe?
- A supply house offers small cans of R-134a to a walk-in DIY customer for a home refrigerator. Under Section 608 sales rules, what is the technician-buyer situation for such small-can HFC sales in stationary refrigeration?
- A technician notices a disposable refrigerant cylinder labeled 'DOT-39.' What does this designation mean for handling?
- A technician recovering R-404A from a walk-in freezer notices the recovery cylinder is getting cold and recovery has slowed. What technique safely speeds recovery?
- A service company keeps invoices showing refrigerant added to and recovered from customer appliances. Under Section 608, these records are important because:
Last reviewed: · editorial process
PrepPass Editorial Team · Verified against EPA Section 608 Technician Certification Exam · How we review