Iowa Permit Test (Iowa DOT Knowledge Test) — All Questions

5 questions

Signs & Signals

A red, eight-sided (octagonal) sign requires you to:

  • a.Stop only if a vehicle is approaching
  • b.Make a complete stop, then go when it is safe✓
  • c.Merge into the next lane
  • d.Slow down and yield to the right

A red octagon is always a STOP sign; you must come to a full stop at the stop line or crosswalk and proceed only when it is safe. (Iowa Driver's Manual, traffic signs)

Signs & Signals

A yellow diamond-shaped sign is used to:

  • a.Mark a rest area
  • b.Warn of a hazard or change in the road ahead✓
  • c.Set the legal speed limit
  • d.Show a mandatory turn

Yellow diamond signs are warning signs that alert you to hazards or changes in the road ahead so you can slow down and prepare. (Iowa Driver's Manual)

Signs & Signals

A flashing red traffic signal means:

  • a.Turn left only
  • b.The signal is out of service, so ignore it
  • c.Speed up to clear the intersection
  • d.Stop completely, then proceed when it is safe, as at a STOP sign✓

A flashing red light has the same meaning as a STOP sign: stop fully, then continue when the way is clear. (Iowa Driver's Manual, traffic signals)

Signs & Signals

A five-sided (pentagon) sign marks:

  • a.A freeway exit
  • b.A hospital zone
  • c.A no-passing area
  • d.A school zone or school crossing✓

The pentagon (five-sided) shape identifies school zones and school crossings; slow down and watch for children. (Iowa Driver's Manual)

Signs & Signals

A solid white line along the road usually means:

  • a.Passing is required
  • b.The lane is for turning only
  • c.It marks the edge of the road or a lane where changes are discouraged✓
  • d.You may cross freely at any time

A solid white line marks the road edge or separates same-direction lanes where lane changes are discouraged. (Iowa Driver's Manual, pavement markings)

Report