InspectionPregunta 26 de 60
When checking the air compressor during inspection, what should you look at if it is belt-driven?
a.The condition and tightness of the compressor drive belt
b.The color of the compressed air
c.The reading on the speedometer
d.The temperature of the parking brake knob
Explicación
If the air compressor is driven by a belt, you should check the condition and tightness of the belt during your inspection. A loose or worn belt can slip and keep the compressor from building enough pressure. A properly tensioned belt helps the compressor keep the system charged.
Practica las 60 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- During a walk-around inspection, how do you check manual slack adjusters on S-cam brakes?
- What is the correct way to begin the air brake check for build-up rate in a dual air system?
- How do you test the low-pressure warning signal?
- At what pressure should the spring brakes come on automatically during the continued-air-loss test?
- How do you perform the static leakage (applied pressure) test on a straight truck with air brakes?
- For a single vehicle (straight truck), what is the maximum allowable air pressure loss in one minute with the brakes applied?
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con CDL Air Brakes Knowledge Test · Cómo revisamos