System PartsPregunta 3 de 60
At about what pressure does the governor typically cut out the compressor from pumping air?
a.Around 125 psi
b.Around 60 psi
c.Around 200 psi
d.Around 20 psi
Explicación
The governor usually cuts out the compressor at about 125 psi, stopping it from pumping more air into the tanks. It cuts the compressor back in at about 100 psi to keep the system in the normal operating range. These values keep tank pressure within a safe working band.
Practica las 60 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- What is the purpose of the air compressor in an air brake system?
- What does the air compressor governor control?
- Why do air storage tanks have a drain valve at the bottom?
- What is the danger of water collecting in the air storage tanks?
- What is the function of the S-cam in a drum air brake?
- Spring brakes on a truck are held in the released position by what?
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con CDL Air Brakes Knowledge Test · Cómo revisamos