Safe DrivingPregunta 47 de 120
You are driving a placarded hazardous materials load and approach an unguarded railroad crossing. What must you do?
a.Proceed without stopping if no train is visible
b.Sound the horn and cross at normal speed
c.Stop no closer than 15 feet and no farther than 50 feet from the nearest rail, look and listen, then cross without shifting gears
d.Stop directly on the first rail to get the best view
Explicación
Placarded hazmat vehicles, most buses, and cargo tanks must stop between 15 and 50 feet from the nearest rail, check both directions, and cross in a gear that will not require shifting. Rolling through, relying on the horn, or stopping on the tracks all defeat the purpose of the required stop.
Referencia Legal: 49 CFR §392.10Practica las 120 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- At what speed can hydroplaning begin when there is a large amount of water on the road?
- Your drive wheels begin to skid when you brake hard on a slick surface. What is the correct recovery?
- You are steering into a corner and the front end pushes straight ahead instead of turning. What is the most likely cause of this front-wheel skid?
- Why should you never start across a railroad crossing unless you are certain you can clear it completely?
- You are entering a highway work zone with reduced lanes and workers present. What is the correct driving behavior?
- You are about to change lanes on a busy interstate. What is the correct communicating procedure?
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con Commercial Driver's License (CDL) General Knowledge Test · Cómo revisamos