Loading & UnloadingPregunta 4 de 80
When approaching a bus stop, you should activate your alternately flashing amber (yellow) warning lights:
a.Only after the bus has fully stopped
b.Just as the door opens
c.Only if students are already at the roadside
d.At least 100 to 300 feet before the stop, per state law
Explicación
Amber warning lights should be turned on at least 100 to 300 feet before the stop, depending on your state's law and speed. These lights warn following traffic that you are about to stop. The red flashing lights and stop arm are then activated when the bus is stopped and loading or unloading.
Practica las 80 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- What is the 'danger zone' around a school bus?
- How far in front of the bus should students walk before crossing so the driver can see them?
- The most dangerous part of the school bus route for students is usually:
- Before students board, the mirrors should be adjusted so that you can see:
- The outside left and right flat mirrors are mainly used to monitor:
- The convex mirrors on a school bus are used primarily to:
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con CDL School Bus (S) Endorsement Knowledge Test · Cómo revisamos