Network ImplementationPregunta 35 de 100
A network requires automatic failover of the default gateway between two routers. Which category of protocol provides this?
a.Link aggregation protocol
b.Spanning tree protocol
c.Address resolution protocol
d.First hop redundancy protocol
Explicación
First hop redundancy protocols such as HSRP, VRRP, and GLBP provide a virtual gateway IP shared by multiple routers for automatic failover. If the active router fails, a standby takes over transparently to hosts. This eliminates the gateway as a single point of failure.
Practica las 100 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- Which addressing technique allows many internal private hosts to share a single public IP address for internet access?
- When configuring a trunk between two switches, which VLAN carries untagged traffic by default?
- Which wireless security standard introduces Simultaneous Authentication of Equals (SAE) to replace the pre-shared key handshake?
- Which technology bundles multiple physical links into one logical link to increase bandwidth and provide redundancy between switches?
- An administrator assigns 192.168.1.0/24 but needs subnets of varying host sizes. Which technique allows different subnet mask lengths within the same address block?
- Which DHCP component defines the range of IP addresses a server can lease to clients?
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con CompTIA Network+ (N10-009) · Cómo revisamos