Network ImplementationPregunta 42 de 100
Which type of NAT maps one private IP address to one dedicated public IP address permanently?
a.Static NAT
b.Dynamic NAT
c.Port Address Translation
d.Overloaded NAT
Explicación
Static NAT creates a permanent one-to-one mapping between a private and a public address, often used to expose an internal server. Dynamic NAT pulls from a pool, and PAT overloads a single public IP. Static NAT provides consistent inbound reachability.
Practica las 100 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- An administrator assigns 192.168.1.0/24 but needs subnets of varying host sizes. Which technique allows different subnet mask lengths within the same address block?
- Which DHCP component defines the range of IP addresses a server can lease to clients?
- A technician must extend a wired network into an area where running new cable is impractical. Which device bridges two network segments over the existing electrical wiring?
- Which SDN plane is responsible for making forwarding decisions and building the network's logical topology?
- An engineer configures a switch port that should immediately transition to forwarding for a single end host. Which STP feature is appropriate?
- Which Layer 3 switch feature provides a virtual interface used to route traffic for a VLAN without a separate router?
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con CompTIA Network+ (N10-009) · Cómo revisamos