Network TroubleshootingPregunta 82 de 100
Users on one switch experience slow performance, and the interface shows a rising count of CRC errors. What does this most likely indicate?
a.A DNS resolution delay
b.An exhausted DHCP scope
c.A misconfigured default route
d.A cabling or physical layer fault
Explicación
Rising CRC errors point to a physical layer problem such as a damaged cable, bad connector, or electromagnetic interference corrupting frames. Replacing the cable and checking for interference sources is warranted. CRC errors indicate frames arriving corrupted.
Practica las 100 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- Which command-line tool traces the path packets take to a destination, revealing each hop along the way?
- Two devices on the same subnet cannot communicate, and one shows a duplicate IP address error. What is the likely cause?
- A fiber link shows very high signal loss and intermittent connectivity. Which physical issue is a likely cause?
- Which tool would a technician use to verify that a newly terminated Ethernet cable has correct pinouts and no opens or shorts?
- A wireless client experiences a weak signal and frequent disconnects far from the access point. Which term describes this coverage limitation?
- Which command displays a host's current IP configuration, including address, subnet mask, and default gateway, on Windows?
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con CompTIA Network+ (N10-009) · Cómo revisamos