Network TroubleshootingPregunta 95 de 100
A server's throughput is far below the link's rated speed, and interface counters show many output drops during peak traffic. What is the likely cause?
a.A DNS misconfiguration
b.An incorrect default gateway
c.A duplicate IP address
d.Congestion causing the interface queue to overflow
Explicación
Output drops during peak traffic indicate the interface queue is overflowing due to congestion, so packets are discarded when buffers fill. QoS, increased capacity, or traffic shaping can relieve it. The correlation with peak load confirms congestion rather than a config error.
Practica las 100 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- A pair of switch ports negotiated a duplex mismatch. Which symptom is most characteristic of this condition?
- After confirming a fix resolves the reported issue, which troubleshooting step should be performed next?
- A technician suspects a specific cable among many in a bundle. Which tool pair helps locate and identify that individual cable?
- Which command shows active TCP/UDP connections and listening ports on a local host?
- The final step of the troubleshooting methodology is to document the findings, actions, and outcomes. Why is this step important?
- A newly connected device gets no link light and no connectivity, while other ports on the same switch work. What should the technician verify first?
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con CompTIA Network+ (N10-009) · Cómo revisamos