RefrigerationPregunta 68 de 110
A refrigerant metering device such as a fixed orifice or TXV creates what effect on the refrigerant?
a.Raises its pressure
b.Condenses it to liquid
c.Causes a pressure drop so it can boil at a low temperature in the evaporator
d.Superheats the vapor before the condenser
Explicación
The metering device restricts flow, dropping the high-pressure liquid to a low pressure so it can boil at a low temperature and absorb heat in the evaporator. This division between high and low sides is central to the cycle. TXVs also modulate this flow to control superheat.
Practica las 110 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- A micron gauge is used during evacuation to measure what?
- Which instrument or method is commonly used for pinpointing small refrigerant leaks?
- As a general principle, adding refrigerant charge to a properly running system tends to do what to the low-side pressure?
- Which category of refrigerants is being phased down under regulations due to high global warming potential?
- A compressor that is trying to compress liquid refrigerant returning from the evaporator can suffer what damage?
- When comparing the two sides of an operating system, the discharge line is normally which relative to the suction line?
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con California CSLB C-20 Warm-Air HVAC Trade Exam · Cómo revisamos