Surface PreparationPregunta 3 de 100
When patching a small nail hole in interior drywall, which sequence is correct?
a.Fill with spackle, let dry, sand smooth, then spot-prime
b.Prime the hole, then fill with spackle and leave unsanded
c.Paint the hole first, then fill with caulk
d.Sand the wall, then apply finish coat directly into the hole
Explicación
Lightweight spackle is pressed into the hole, allowed to dry, then sanded flush with the surface. Spot-priming the patch seals the porous filler so the finish coat dries to a uniform sheen. Skipping the primer often causes 'flashing,' where the patch shows through as a dull spot.
Practica las 100 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- Before repainting a previously painted, chalky exterior stucco wall, what is the FIRST thing a painter should do to ensure adhesion?
- What is the primary purpose of caulking gaps around window trim before painting?
- Under the EPA Renovation, Repair and Painting (RRP) Rule, work that disturbs painted surfaces in housing built before which year generally triggers lead-safe requirements?
- Which work practice is REQUIRED by the EPA RRP Rule when disturbing lead-based paint in a pre-1978 home?
- What causes efflorescence, the white crystalline deposit sometimes seen on masonry and concrete?
- Before painting new bare wood trim, why is sanding in the direction of the grain important?
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con California CSLB C-33 Painting & Decorating Trade Exam · Cómo revisamos