Products & MaterialsPregunta 40 de 100
What is the purpose of adding a small, manufacturer-recommended amount of the correct thinner to paint for spraying?
a.To reduce viscosity so the paint atomizes and flows properly through the sprayer
b.To increase the VOC limit allowed by law
c.To make the paint dry slower on purpose in all cases
d.To change the color of the paint
Explicación
Thinning to the manufacturer's recommendation lowers viscosity so the material atomizes and sprays evenly, reducing clogging and improving finish. Over-thinning causes runs and reduced film build, and any thinning must stay within VOC limits. Always follow the product data sheet for the correct solvent and amount.
Practica las 100 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- When selecting a coating for a surface exposed to constant direct sunlight, which property is especially important?
- A primer's main job is to do what?
- If a coating is applied at 4 mils wet and the paint is 50% solids by volume, what is the approximate dry film thickness?
- Which coating type is commonly used to bridge and waterproof hairline cracks on exterior stucco?
- Why should you avoid mixing incompatible coatings, such as applying a strong solvent-based lacquer over fresh latex?
- One gallon of paint is stated to cover 400 sq ft at the recommended film thickness. If you apply it too thin to stretch coverage to 500 sq ft, what is the likely result?
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con California CSLB C-33 Painting & Decorating Trade Exam · Cómo revisamos