Services, Grounding & BondingPregunta 56 de 120
How must a panelboard be protected against overcurrent?
a.By an overcurrent device rated at 125 percent of the panelboard rating
b.By the sum of the branch-circuit devices installed in it
c.By an overcurrent device having a rating not greater than the panelboard rating
d.No separate protection is required if the feeder conductors are properly sized
Explicación
Each panelboard must be protected by an overcurrent device rated no higher than the panelboard rating, located either in the panelboard itself as a main or ahead of it in the feeder. Summing the branch devices routinely exceeds the panelboard rating because of diversity, and no code rule allows protecting a panelboard at 125 percent of its rating.
Referencia Legal: 2023 NEC §408.36Practica las 120 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- What is the minimum service disconnecting means rating for a one-family dwelling?
- What is the minimum clearance above a residential driveway for overhead service conductors limited to 150 volts to ground?
- Overhead service conductors must maintain what minimum clearance from a window that is designed to be opened?
- Ground-fault protection of equipment is required for a solidly grounded wye service with more than 150 volts to ground when the disconnect is rated at least what value?
- On the load side of the service disconnecting means, what is the general rule for using the grounded neutral conductor to ground equipment enclosures?
- A dry-type transformer rated 112.5 kVA or less is installed indoors. What is the minimum separation from combustible material unless it is separated by a fire-resistant heat-insulating barrier?
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con Journeyman Electrician Licensing Exam (NEC-based) · Cómo revisamos