Drainage, Waste & VentPregunta 28 de 120
A horizontal fixture branch serves three lavatories only. Any branch that receives the discharge of a water closet must be at least what size?
a.1-1/2 in
b.2 in
c.2-1/2 in
d.3 in
Explicación
No drain receiving the discharge of a water closet may be smaller than 3 in, regardless of how few fixture units are on it. The 1-1/2 in and 2 in sizes serve lavatories, sinks, and similar small fixtures, and 2-1/2 in is not a size used for water closet drainage.
Practica las 120 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- A 3 in horizontal branch must gain 4-1/2 in of fall between two fixed points. At the minimum slope for 3 in pipe, what is the longest run that produces exactly that fall?
- A 4 in horizontal drain is sized to carry a load of drainage fixture units. Which pipe run carries the greatest DFU load for a given diameter?
- A branch serves one water closet at 4 DFU, one lavatory at 1 DFU, one bathtub with shower at 2 DFU, and one kitchen sink at 2 DFU. What is the total DFU load on that branch?
- A 1-1/4 in trap arm serves a small lavatory. The vent is located 3 ft of developed length from the trap weir. What is the correct evaluation?
- A row of five lavatories on a common horizontal branch in a public restroom is vented by a single vent connected between the last two fixture drains. What type of venting is this?
- An 8 in building drain is proposed at 1/16 in per ft over a 200 ft run. What is the fall, and is that slope permitted?
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con Journeyman Plumber Licensing Exam (UPC/IPC-based) · Cómo revisamos