SafetyPregunta 98 de 110
Backflow prevention is a public-health safety requirement. What health event does a properly working backflow assembly prevent?
a.Water hammer
b.Contaminated water being drawn or pushed back into the potable supply
c.Pipe corrosion
d.Frozen pipes
Explicación
Backflow protection prevents non-potable or contaminated water from entering the public drinking-water system through backsiphonage or backpressure, which has caused real disease outbreaks. The assembly is the barrier between a cross connection and the community's water. This is why high-hazard connections require the fail-safe reduced-pressure principle assembly.
Referencia Legal: UPC §603.0Practica las 110 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- A plumber must enter a sanitary sewer manhole to make a connection. This is a permit-required confined space. What atmospheric hazard is the leading concern, and what is required before entry?
- Before entry, a manhole 4 ft in diameter and 12 ft deep must be purged with 5 air changes. Using volume = 0.785 x diameter^2 x depth (about 151 ft^3), what total air volume must be moved to complete the purge?
- A plumber sets an extension ladder to reach a roof vent terminal. Using the 4-to-1 rule, how far should the base be from the wall if the ladder contacts the wall 16 ft up?
- A master plumber must braze medical gas copper, which is hot work. What fire-safety precaution is required before starting?
- A plumber replaces piping in a building constructed before 1978 and disturbs old painted surfaces and solder. What two legacy hazards require specific precautions?
- A 2,000 lb cast-iron section is lifted by a two-leg sling with each leg at 60 degrees from horizontal. Each leg carries (load / 2) / sin(60 degrees), with sin(60) about 0.866. What is the tension in each sling leg?
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con Master Plumber Licensing Exam (UPC/IPC-based) · Cómo revisamos