DispensingPregunta 55 de 100
To relieve a frame that sits too low on the face, the optician should adjust what?
a.Widen the temples
b.Tighten or narrow the nose pads/bridge
c.Loosen the temples
d.Increase pantoscopic tilt
Explicación
If the frame slides down, narrowing or tightening the nose pads (or choosing a smaller bridge) raises the frame and improves the fit. Adjusting the bridge controls how high the frame rides.
Practica las 100 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- Pantoscopic tilt refers to what?
- If a patient complains a new progressive lens has narrow, distorted side vision, what is the most likely cause of unavoidable blur?
- Which lens material is required for a child's everyday eyewear for safety reasons?
- A patient says their bifocal segment is too high and they see the line while walking. The correct fix is to do what?
- MPD (monocular PD) is preferred over binocular PD because it accounts for what?
- High-minus lenses can be made cosmetically thinner at the edge by doing what?
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con ABO (American Board of Opticianry) Certified Optician Exam · Cómo revisamos