DispensingPregunta 69 de 100
To fit a frame that is too tight and leaves marks on the temples, the optician should do what?
a.Add pantoscopic tilt
b.Shorten the temples
c.Widen the temple spread or adjust the endpieces outward
d.Increase the base curve
Explicación
When a frame grips the sides of the head too tightly, spreading the temples or adjusting the endpieces outward increases the temple width and relieves the pressure marks on the head.
Practica las 100 preguntas gratis — sin registro.
Preguntas relacionadas de este tema
- Which patient complaint most suggests the PD was measured or set too wide?
- A photochromic lens is a poor choice for a patient who wants dark lenses primarily where?
- Anti-reflective coating is especially recommended for which patients?
- A patient with a strong Rx wants the thinnest possible lens. Besides high-index material, what frame choice helps most?
- For a progressive lens, insufficient seg/fitting height (frame too shallow) causes what problem?
- When dispensing polycarbonate, which coating is nearly always added and why?
Última revisión: · proceso editorial
Equipo Editorial de PrepPass · Verificado con ABO (American Board of Opticianry) Certified Optician Exam · Cómo revisamos