Transmission & Drivetrain (A2/A3)Câu 19 / 120
A manual transmission clutch that slips under load, especially in higher gears, most commonly indicates:
a.Too much clutch pedal free play
b.A worn clutch disc or weak pressure plate
c.A dry pilot bearing
d.A broken motor mount
Giải thích
A worn friction disc or weak pressure plate cannot hold torque, so the clutch slips under load and engine rpm rises without matching acceleration. Slipping generates heat that accelerates wear. Insufficient free play, not too much, can also cause slipping.
Luyện miễn phí toàn bộ 120 câu hỏi — không cần đăng ký.
Câu hỏi liên quan cùng chủ đề
- In an automatic transmission, the torque converter's function is to:
- Technician A says burnt-smelling, dark automatic transmission fluid can indicate overheating and clutch damage. Technician B says fluid color and smell never matter. Who is correct?
- Constant-velocity (CV) joints are used on front-wheel-drive axles primarily because they:
- A clicking noise from the front of a FWD vehicle that increases when turning sharply is most likely caused by:
- The differential in a rear axle allows:
- Technician A says a worn driveshaft U-joint can cause a clunk on acceleration. Technician B says it can cause a vibration that increases with vehicle speed. Who is correct?
Cập nhật gần nhất: · quy trình kiểm tra
Đội Ngũ Biên Tập PrepPass · Đối chiếu với ASE Automobile Certification Series (A1–A8) · Quy trình kiểm tra